Plunger Assembly
WHAT
The customer needed to rivet washers and springs to a plunger body to create a secure work piece.
WHY
The customer was having trouble with current cycle time and volume was expected to increase. They were intrigued by the capability of the RNR-181 indexing riveting station.
HOW
Due to the increased volume and need to decrease cycle time, ¸ß±¶ÀºÇò suggested the RNR-181 indexing riveting station. This station incorporated a four position indexer to allow for increased output. The ability of the 181 to quickly form the rivets in less than 2 seconds further decreased cycle time and increased output.
Facts & Figures
| Reference No. | BUSA1019 |
| Riveting Force | 5.00 kN |
| Riveting Process | Radial |
| Material | Steel |
| Cycle Time | approx. 2 sec |
| Forming Time | approx. 0.6 sec. |
| Forming Tool | Flat tool (5mm) |
| Stroke | 24.0 mm |
| Device | RN 181 |
| Process Control | Time Mode |
| Area of Application | Automotive, mechanics |
| User Benefits. Process | Decreased cycle time |
| User Benefits: Economic | Higher output |
Project implemented by ¸ß±¶ÀºÇò Corporation - USA
For further questions or detailed information contact:
¸ß±¶ÀºÇò Corporation
121 Hillpointe Drive
Suite 900
Canonsburg, PA 15317
Phone
E-Mail info.us(at)baltec.com
or one of our ¸ß±¶ÀºÇò representatives with technology center